|
NUT-SEAL
ANTI-CORROSION
GREASE
Nut-Seal grease is specially formulated for use with
Nut-Seal products. This is an anti-corrosion grease
with excellent rust and oxidation inhibiting
characteristics, a wide temperature application
range of -10° to 325° and it has a an excellent
resistance to oxidation. Because of excellent
properties this grease will not wash out, pound out,
splatter or squeeze out under the heaviest load of
vibrations.
Typical Specifications
|
NLGI Consistency Number |
2 |
|
NLGI Certified |
GCS-LB |
|
Thickener |
Lithium Complex |
|
Texture |
Smooth |
|
Color, Observed |
Red |
|
Worked 60 penetration, D-217 |
265-295 |
|
Dropping point, D-2265, °F. (°C)
|
550 (288) |
|
Water washout, D-1264, % loss |
2.5 @ 175°F |
|
Rust Prevention, D-1743, rating |
Pass |
|
Copper Corrosion, D-4048 |
Pass |
|
Oxidation Stability, D-942, psi drop
|
2 @ 100 hrs. |
|
Oil Separation, D-1742 |
1 |
|
Timken OK Load, D-2509, lb |
80 |
|
Four-Ball Wear, D-2266, mm |
0.45 |
|
Four-Ball EP Weld Point, D-2596, kgf
|
315 |
|
Four-Ball Load Wear Index, D-2596, kgf
|
50 |
|
Four-Ball Last Nonseizure Load, D-2596, kgf
|
80 |
|
Approximate Temperature Range, °F.(°C)
|
-10 to 325 (-23 to 163) |
CHARACTERISTICS OF OIL PLUS OIL
SOLUBLE ADDITIVES:
| |
@100°C., eSt |
43.96 |
| |
@40°C., eSt |
632.5 |
| |
@210°F., eSt (SUS) |
45.8(213) |
| |
@100°F., eSt (SUS) |
718.9(3330) |
|
