Subsea Cutting And Decommissioning

BTC Undersea Cutting System
Faster, Better, and Safer.

The BTC Undersea Cutting System, provided by INTEGRA Technologies / Cutting Edge Services, is ideal for the challenging world of Subsea Cutting and Debris Removal.

The BTC Undersea Cutting System is a highly efficient hydraulically driven machine that uses diamond wire for cutting structures above or below the water. The diamond wire suits the environment of the Offshore industry and provides safe and fast cutting for any type of material in a single operation.

The BTC diamond wire saw is installed and monitored by Divers and the wire speed, working pressure and flow rate is controlled from the surface using a Hydraulic Power Unit. It also easily adapts to ROV Operations.

All of INTEGRA’s subsea cutting and debris removal products can be run from the same power unit eliminating the need to use up additional floor space with extra power units.

integra-hex-1
integra-hex-1

REMOTELY OPERATED

SAVE FLOOR SPACE

integra-hex-1
integra-hex-1

SAFE

EFFECTIVE

subsea-cutting-integra
REQUEST A QUOTE
BTC Self Clamping Circular Saw
Topside or subsea.

The BTC Self Clamping Saw provides a safe and effective means of cutting small diameter material either topside or subsea. Diver intervention is only required to guide the saw to the cutting location—once the hydraulic clamps are actuated the diver leaves the cutting area.

The saw can also be operated from INTEGRA’s standard BTC Power Pack and umbilical. ROV retrofit is also possible.

All of INTEGRA’s subsea cutting and debris removal products can be run from the same power unit eliminating the need to use up additional floor space with extra power units.

integra-hex-1
integra-hex-1

VERSATILE

EFFECTIVE

integra-hex-1
integra-hex-1

SAFE

CAN BE ROV OPERATED

subsea-cutting-integra-technologies
REQUEST A QUOTE
the-claw-integra-technologies-subsea-debris-removal
REQUEST A QUOTE
The Claw™ – 40 Ton Grapple
Pinch, pull or drag.

INTEGRA’s Claw™ has been designed to pick up debris from the ocean floor. Hydraulic powered claws can pinch, pull or drag heavy objects and pick up multiple pieces of debris at the same time.

INTEGRA’s Claw™ has an attachment that can be fitted, providing a point where material handling equipment can connect to the object for movement or the attachment can be used as a point for tie down, allowing heavy items to be held firmly in place with the use of ropes or chains.

The Claw™ has a rating of 40 tons and can be used to pick up objects with a diameter of 0″ to 48″.

There are three ways to control The Claw™: from the control station on the Power Unit, from the wired remote control box or from a wireless remote.

integra-hex-1
integra-hex-1

SECURE

RELIABLE

integra-hex-1
integra-hex-1

POWERFUL

FAST

Scorpion™ Shear
Cut 24″ diameter in 9 seconds.

The SCORPION™ Shear provides a fast and safe option for removing structures. The SCORPION™ is durable and easy to use cutting up to 24″ diameter structures in 9 seconds. Once the diver has guided the shear into place, control of the shear is taken over topside allowing the diver to move to a safe area while the cutting is taking place.

The shear package comes with a diesel power pump and hydraulic reel with 500ft umbilicals.

integra-hex-1
integra-hex-1

SAFE

DEBRIS REMOVAL

integra-hex-1
integra-hex-1

POWERFUL

FAST

scorpion-shear-integra-technologies-subsea-debris-removal-1
REQUEST A QUOTE