About sbakshi

This author has not yet filled in any details.
So far sbakshi has created 15 blog entries.

Leak-Free Assemblies: Control the Process Part I

By |2022-05-20T16:49:55+00:00May 3rd, 2022|Blog|

Leak-Free Assemblies: Control the Process Part I Part I Leaks are preventable. Flanges are designed not to leak, and when sealed properly they live up to their design. And yet, leaks happen. When we’re lucky, they are small and emit harmless substances. When our luck runs out, leaks are catastrophic. So then how do we

Visit Our IEP Website NOW!

By |2022-04-27T20:55:27+00:00April 27th, 2022|Blog|

Visit Our IEP Website NOW! INTEGRA Technologies is pleased to announce the launch of our brand-new INTEGRA Engineered Products (IEP) website, IEPengineering.com! Visit the IEP website to view the full array of INTEGRA’s engineered products and tools, product-specific information such as size specs and technical material, and our new buyer’s guide. Gain an in-depth understanding

Leak-free Start-ups : Process & Pitfalls

By |2022-04-28T14:51:24+00:00December 30th, 2021|Blog|

Leak-Free Start-Ups : Process & Pitfalls Bolted joint assemblies are dynamic systems, and a variety of factors can impact their sealing capacity. In this article, we review the process involved in developing leak-free start-ups, common pitfalls that we see out in the field, and how INTEGRA can help eliminate leaks in your bolted joint assemblies.

Certainty of Outcome

By |2022-04-28T15:06:27+00:00November 9th, 2021|Blog|

Certainty of Outcome We work in a multi-billion-dollar industry where the consequences of failure extend far beyond the economic. Unexpected challenges arise at inopportune times, with consequences ranging from inconvenient to dangerous. At best, these challenges cause project creep and loss of revenue. At worst, they threaten the personal and environmental safety of our workers,

Avoiding the Galling Roadblock

By |2022-04-28T15:07:34+00:00October 18th, 2021|Blog|

Avoiding the Galling Roadblock Need a surefire way to speed-up breakouts, increase worker safety, and finish your turnaround on schedule and under budget? Then you need to eliminate galling. If you’ve ever run a breakout, you’ve dealt with galling. It’s an industry-wide problem that happens so often it’s scheduled into even your biggest turnarounds. On

Go to Top